Elite Big PAC-i PE3 (R32)
Enquire Now
The 8-10HP from Panasonic is ideally suited for large retail applications and other large areas not needing the higher capacities of VRF systems.
Indoor unit can be disassembled down to Heat Exchanger and Fan Assemblies to allow for installation in tight spaces. Ideal for Retrofit solutions.
The lightweight and compact design enables easier installation in any commercial space.
The twin fan system saves valuable footprint compared to traditional 8-10HP systems which are larger and therefore require more space.
Sales information Logicool technical bulletin Service manuals Installation manual IU Dimensions OU Dimensions
| Model Reference | Nom. Cool (kW) | Nom. Heat (kW) | Max Pipe (m) | EuP Lot 10 Energy Rating | Fuse (Amps) In/Out | Pipe Size Gas | Pipe Size Liquid | Electrical Supply |
||
| Indoor Unit | Outdoor Unit | SCOP | SEER | |||||||
| S-200PE3E5B | U-200PZH2E8 | 19.5 | 22.4 | 90 | 3.61 | 5.25 | 5 / 32 | 1 1/8 | 3/8 | Three |
| S-250PE3E5B | U-250PZH2E8 | 23.2 | 28 | 90 | 3.61 | 4.84 | 5 / 32 | 1 1/8 | 1/2 | Three |
Features and Benefits
- Higher efficiency
- Indoor unit can be disassembled down to Heat Exchanger and Fan Assemblies to allow for installation in tight spaces. Ideal for Retrofit solutions.
- New heat exchanger – The new heat exchanger has been designed with 8% bigger surface than conventional model. This enlarged surface provides high performance of heat
exchange effect. Also, highly efficient piping pattern increases heat exchange performance by 5%. - New and bigger fan – 27% higher air flow rate than PE1 Model
- New Panasonic Compressor – Best inverter control providing better partial load in industry* 10%-100% Frequency Hz. Wider operation Hz range of compressor realize more
high efficient operation through the year. - New chassis
- Better partial load
- More flexible
- Bluefin anti-rust coating
- 0-10V control demand
Power/Wiring
Panasonic PAC-i systems require a separate power supply to Indoor (3 Amp isolator for all units) and Outdoor Units. It is also possible to supply power to outdoor unit only, and run power to indoor via a 3 core flex from a field supplied fused terminal block. A separate 2 core 0.75mm² screened cable will also be required for data connection
Product Images
Advanced Technical Data
Indoor Units
| Indoor Unit Technical Data | ||
| Model | S-200PE3E5B | S-250PE3E5B |
| Cooling (kW) - Nominal | 19.5 | 23.2 |
| Heating (kW) - Nominal | 22.4 | 28 |
| Cooling (kW) - Max SEER Condition | 21 | 27 |
| Heating (kW) - Max SCOP Avg Climate Condition | 25 | 29 |
| Sensible Heat Ratio (SHR) | TBC | TBC |
| 41/44/46 | 41/44/46 | 42/45/47 |
| Statuc Pressure (Pa) | 75/120/180 | 75/130/180 |
| Height - mm | 486 | 486 |
| Width - mm | 1456 | 1456 |
| Depth - mm | 916 | 916 |
| Weight - kG (grille) | 86 | 88 |
| Air Flow Rate (l/sec) | 883/1050/1200 | 983/1200/1400 |
| Fused Spur (A) | 5 | 5 |
Condensing Units
| Outdoor Unit Technical Data | ||
| Model | U-200PZH2E8 | U-250PZH2E8 |
| Combinations | Twin/Triple/Quad | |
| Height (mm) | 1500 | 1500 |
| Width (mm) | 980 | 980 |
| Depth (mm) | 370 | 370 |
| Weight (kG) | 117 | 128 |
| Airflow (l/sec) Cool/Heat | 2733 / 2733 | 2667 / 2667 |
| Sound Pressure Cooling (dBA) | 59 | 59 |
| Sound Pressure Heating (dBA) | 61 | 63 |
| Liquid (mm(inches)) | 1 1/8 | 1 1/8 |
| Gas (mm(inches)) | 3/8 | 1/2 |
| Max Pipe Run (m) | 90 | 90 |
| Max Pipe Lift (m) | 30 | 30 |
| Pre-charged to (m) | 30 | 30 |
| Standing Charge (kG) | 4.2 | 5.8 |
| Additional Charge per meter (g) | 60 | 80 |
| Refrigerant | R32 | |
| Phase | Three | |
| Power Supply to | IU (5A) and OU or OU with feed to IU | |
| Running Current (Cool - Heat) | TBC | TBC |
| Input Power (Cool - Heat) | 6.06 / 6.21 | 7.46 / 8.21 |
| Fuse Rating (A) | 32 | 32 |
| Interconnecting | 2C Screen 0.75mm? | |
| Twin Pipe Kit | CZ-P680BK2BM | |
| Triple Pipe Kit | CZ-P3HPC2BM | No Combination |
| Quad Pipe Combination | CZ-P680BK2BM x 1 and CZ-P224BK2BM x 2 | |
Back to products