MW1 Type Hydrokit For ECOi
Enquire Now
Hydrokit for ECOi, water at 45 °C • R410A
Connect the Hydrokit to your VRF system, together with other indoor units
Total system performs high energy efficiency by this heat recovering operation, and it gives an advantage for sustainability related assessment methods, such as BREEAM in UK
| Model Reference | Nom. Cool (kW) | Nom. Heat (kW) | Fuse (Amps) | Pipe Gas | Pipe Liquid | Electrical Supply |
|
| Indoor Unit | Outdoor Unit | ||||||
| S-80MW1E5 | Optional. 3-Pipe VRF System (Up to 48HP) | 8.00 | 9.00 | 5 | 5/8 | 3/8 | Single |
| S-125MW1E5 | 12.50 | 14.00 | 5 | 5/8 | 3/8 | Single | |
Maximum Indoor ratio (connectable hydrokit module capacity ratio)
Total indoor unit + Hydrokit capacity: up to 130 % (** ~ **% vs. total outdoor unit capacity)
Basic principle & advantage.
Hydrokit module provides hot water by using waste heat that is recovered from standard air-conditioning indoor unit in cooling mode.
Technical focus
Only with 3-Pipe ECOi EX MF3 Series outdoor units
Remote controller CZ-RTC5B common use with DX coil indoor units ECOi and PACi
Overview: hydromodule in VRF system
Multiple hydromodule connection in same circuit is available
Each module can be set different operation mode either hot water supply mode or space heating mode (both operation modes are not able to set at 1 hydromodule)
3-Pipe control solenoid valve kit is necessary for each indoor unit and hydromodule
Back to products