LGH-RVXT-E Low Height Commercial
Mitsubishi Electric Air Conditioning - Lossnay Heat Exchanger Commercial Series
Enquire Now
Lossnay Mechanical Ventilation Heat Recovery (MVHR) systems, are designed to supply fresh air into any commercial building whilst simultaneously extracting stale air and, most importantly, recovering valuable heat energy for maximum efficiency
LGH-RVXT-E Models are Single Height and designed to fit in most ceilings where there is a larger room footprint, high fresh air requirement and a ceiling void restriction.
Available in 1500m³/hr, 2000m³/hr, and 2500m³/hr models.
Sales information 2 Sales information 3 Logicool technical bulletin Operational Manual Service manuals Installation manual IU Dimensions
Product video Product video 2
| Model Reference | Air Flow m3/h High-Med-Low | Air Flow I/s High-Med-Low | Height (mm) | Width (mm) | Depth (mm) | Nom. Duct Conn (mm) | Electrical Supply |
| Indoor Unit | |||||||
| LGH-150RVXT-E | 1500-1125-375 | 417-313-104 | 500 | 1980 | 1500 | 250 | Single |
| LGH-200RVXT-E | 2000-1500-500 | 556-417-139 | 500 | 1980 | 1500 | 250 | Single |
| LGH-250RVXT-E | 2500-1875-625 | 694-521-174 | 500 | 1980 | 1500 | 250 | Single |
LGH-RVXT-E Key Features:
- Single Height – easier to install in smaller ceilings
- ErP Lot 6 Approved
- New 250m³/hr model
- Over 80% Temperature Exchange Efficiency
- Free cooling function
- Total heat exchange (sensible and latent)
- New “Night Purge” Mode
- Cross Flow Heat Exchanger on RVXT-E Models only
- New smaller and more compact cores for simpler installation and maintenance
DID YOU KNOW?
Our Lossnay LGH-RVXT-E range can be flipped up-side down to allow greater flexibility when designing duct runs. The enthalpy heat exchanger does not require
a condensate drain or tray, because the moisture passes through the heat exchanger alongside the heat energy
Back to products